Lage Rifle Stocks



Lage Rifle Stock

Rifle Stocks

Description PRICE
This light weight durable stock is designed for use with all of our stock adapters and folding mechanisms. Additionally, it is compatible with any ACE Rifle Stock patterned folding stock mechanism and stock adapters with two #10-32 mounting screw holes spaced 5/8" (.625") apart. This buttstock features a sling mount on the top rear of the buttstock. Manufactured from glass reinforced nylon, this stock is not only strong, it is more comfortable to shoot in extreme cold or heat than an aluminum stock. Measures 8-1/2" from front to rear. Also available in 1" or 2" shorter length. Weight: 8-1/2" is 7.6 Ounces, 7-1/2" is 7.0 Ounces, 6-1/2" is 6.4 Ounces. 1/2" and 1" stock spacers are available to increase the length. Mounting Screws included. Made in the U.S.A.
8-1/2" Stock. #302
(Recommended Length for MPX or Scorpion)
$45.00
7-1/2" Stock. #301 $45.00
6-1/2" Stock. #300 $45.00


Lage Stock Spacer











Stock Spacers

Description PRICE
Stock spacers for our stocks above. Can be used with any length stock. These stock spacers allow you to configure a custom length of pull. length. Weight: 1/2" is .2 Ounces, 1" is .4 Ounces. Extra long Mounting Screws included.
1/2" Stock Spacer. #330 $7.00
1" Stock Spacer. #331 $7.00

MCX Stock Adapter








Picatinny M1913 Stock Adapter

This stock adapter is designed for attaching to any firearm with a Picatinny M1913 Mount such as the Ruger PC Charger, Dan Haga Designs Picatinny Stock Adapters, SIG 556, SIG MCX, Rock River Arms LAR-PDS, etc.. If your gun has a picatinny rail on the back, this adapter will fit it.

Compatible with all of our stocks, folding stock mechanisms and AR Stock Adapters.

Additionally, it is compatible with any ACE Rifle Stock patterned stock or folding stock mechanism with two #10-32 mounting screw holes spaced 5/8" (.625") apart. This is also a standard mounting pattern for stocks made by Manticore Arms, DPH, Stormwerkz, HDPS and more. With the addition of our AR-15 Stock Adapter, a commercial or Mil-Spec' buffer tube can be added to attach an AR stock, SIG Brace or Shockwave Blade. Secures with one screw. Manufactured from 6061 aluminum and finished in flat black anodize. Adds .40" to the rear of the receiver. Weighs 2.0 Ounces. Made in the U.S.A. #357
$59.99




MPX Stock Adapter MPX Stock










SIG MPX Stock Adapter

This stock adapter is designed for use with the SIG MPX pistol or rifle. Compatible with all of our stock adapters and folding mechanisms. Additionally, it is compatible with any ACE Rifle Stock patterned stock or folding stock mechanism with two #10-32 mounting screw holes spaced 5/8" (.625") apart. This is also a standard mounting pattern for stocks made by Manticore Arms, DPH, Stormwerkz, HDPS and more With the addition of our AR-15 Stock Adapter, a commercial or Mil-Spec' buffer tube can be added to attach an AR stock, SIG Brace or Shockwave Blade. Secures with one screw. Manufactured from 6061 aluminum and finished in flat black anodize. Adds .40" to the rear of the receiver. Weighs 2.4 Ounces. Made in the U.S.A. and engraved "LAGE USA" on the bottom. These stocks will fit the MPX Gen 1 and Gen 2, but not the MPX Copperhead. #329 $59.99


MCX Stock Adapter MCX Stock








SIG MCX / M1913 Stock Adapter

This stock adapter is designed for use with the SIG MCX pistol or rifle. It can also be used with the SIG 556 rifle and on any M1913 Picatinny Mount.

For the MCX, it is compatible with all of our stocks and left folding stock mechanisms. Our right folding stock mechanisms are not compatible due to the forward assist on the right side of the Upper.

For the SIG 556 or Rock River Arms LAR-PDS, all of our stocks and folding stock mechanisms are compatible, left or right folding.

Additionally, it is compatible with any ACE Rifle Stock patterned stock or folding stock mechanism with two #10-32 mounting screw holes spaced 5/8" (.625") apart. This is also a standard mounting pattern for stocks made by Manticore Arms, DPH, Stormwerkz, HDPS and more. With the addition of our AR-15 Stock Adapter, a commercial or Mil-Spec' buffer tube can be added to attach an AR stock, SIG Brace or Shockwave Blade. Secures with one screw. Manufactured from 6061 aluminum and finished in flat black anodize. Adds .40" to the rear of the receiver. Weighs 2.0 Ounces. Made in the U.S.A. #357
$59.99




Scorpion Stock Adapter Scorpion Stock











CZ EVO Scorpion Stock Adapter

This stock adapter is designed for use with the Scorpion rifle or registered Short Barreled Rifle Compatible with all of our stock adapters and folding mechanisms. Additionally, it is compatible with any ACE Rifle Stock patterned stock or folding stock mechanism with two #10-32 mounting screw holes spaced 5/8" (.625") apart. This is also a standard mounting pattern for stocks made by Manticore Arms, DPH, Stormwerkz, HDPS and more. With the addition of our AR-15 Stock Adapter, a commercial or Mil-Spec' buffer tube can be added to attach an AR stock, SIG Brace or Shockwave Blade. Three sets of #10-32 mounting screw holes provide 3/4" of vertical adjustment. Slides and locks in place like the factory original stock mount, except with a tighter fit. Manufactured from 6061 aluminum and finished in flat black anodize. Adds .38" to the rear of the receiver. Weighs 2.2 Ounces. Made in the U.S.A. and engraved "LAGE USA" on the bottom.#328 $59.99



Image Image














Lage K-Folding Stock, Right Folding, 5 Deg. Cant

Description PRICE
This stock features a folding mechanism that folds the stock down at a five degree angle to provide clearance for the ejection port and controls on the right side of the receiver. It is designed with a thinner profile to fold very flat and provide a slim package. It is designed for use with all of our stock adapters. Additionally, it is compatible with any stock adapter with two #10-32 mounting screw holes spaced 5/8" (.625") apart. The folding stock mechanism and stock cheek bar are made from black anodized 6061 aluminum and the buttpad is made from black Delrin. Length from the butt to the rear of the stock adapter plate is 10-3/8". Available in lengths as short as 8". Weight: 9.4 Ounces. Recommended FSM for: Sig MPX, EVO Scorpion, MAX-31A, MAX-31k, MAX-11A1 Made in the U.S.A. Lage P/N: FSMK5R #350 $164.98


Lage Folding Stock Mechanisms (FSM)

The Lage Folding Stock Mechanism (FSM)fits between the Stock Adapter and Stock. Lage FSMs are designed to be easier to open than competitors' designs. Wrap your fingers around the stock and put your thumb on top of the hinge pin and squeeze. Easily pops open. Locks in open or closed position, pull from the side to deploy.

Our FSMs are manufactured with the Boss. Must be used with a stock adapter with a pocket machined for the Boss.


Image











Lage Folding Stock Mechanism, Left or Right Folding

Description PRICE
The FSM can be mounted to fold either left or right. Will add .83" to your LOP. Weighs 3.5 oz. Manufactured from 6061 aluminum and finished in black anodize. Made in the U.S.A. Lage P/N: FSM1 $59.99


Image











Lage Folding Stock Mechanism, Left Folding, 3 Deg. Cant

Description PRICE
The Left folding FSM with three degree cant. When folded on the side of the gun, the stock swings down at a three degree angle providing clearance for cocking knobs or other controls on the left side of the gun. Will add .9" to your LOP and has 1/2" of vertical adjustment. Weighs 3.1 oz. Manufactured from 6061 aluminum and finished in black anodize. Made in the U.S.A. Lage P/N: FSM3L $59.99


Image












Lage Folding Stock Mechanism, Right Folding, 5 Deg. Cant

Description PRICE
The Right folding FSM with five degree cant. When folded on the side of the gun, the stock swings down at a five degree angle providing clearance for the ejection port, cocking knobs or other controls on the right side of the gun. Will add .9" to your LOP and has 1/2" of vertical adjustment. Weighs 3.2 Ounces. Manufactured from 6061 aluminum and finished in black anodize. Recommended FSM for: Sig MPX and EVO Scorpion Made in the U.S.A. Lage P/N: FSM5R $59.99


Image












ACE Folding Stock Mechanism

Description PRICE
Folding Stock Mechanism (FSM)fits between the Stock Adapter and Stock. The FSM can be mounted to fold either left or right. Locks in open or closed position, pull from the side to deploy. #10-32 threaded hole on side to add a sling mount. Will add .75" to your LOP and has 1/2" of vertical adjustment. Weighs 3.5 oz. The FSM is manufactured with the Boss. The Boss is the raised (oblong shaped) portion on the Arm (small side). Manufactured from 6061 aluminum and finished in black anodize. ACE P/N: A500. Made in the U.S.A.#ACEFSM $68.99




AR15 Stock Adapter AR-15 Stock Adapter












AR15 Stock Adapter without Boss

Description PRICE
With the addition of our AR-15 Stock Adapter, a commercial or Mil-Spec' buffer tube can be added to attach an AR stock, SIG Brace or Shockwave Blade to one of our folding stock mechanisms. Mounting side is flat faced without a boss. Attaches to the stock adapter with two #10-32 screws. Buffer tube is secured with one screw. A buffer tube castle nut is also recommended. 1/2" of vertical adjustment. Manufactured from 6061 aluminum and finished in flat black anodize. Weighs .7 Ounces. #351 $31.99

Magpul MOE Stock Assembly without End Plate












Magpul MOE Stock Assembly without End Plate

Description PRICE
Includes Magpul MOE Stock, Mil-Spec' buffer tube, and Castle Nut. The End plate is not needed when using with the MPX, MCX, Scorpion, M-10 AR Stock Adapter or M-11 AR Stock Adapter. Also works with the AR15 Stock Adapters shown above.#752 $54.99

K-Grip

Image

Forward Canted K-Grip, Clamp On

Description PRICE
This clamp on K-Grip attaches to any M1913 Picatinny rail. The canted angle allows a natural shooting stance which is more comfortable than a straight vertical grip. The clamp is made from 6061 aluminum and finished in black anodize. The grip portion is made from black polymer and will stay cool during extended shooting sessions. #419A $49.99






Note: All prices are subject to change without notice.