Lage Manufacturing Stocks



MPX- Fixed Lage Stock

Image Image














MPX- Fixed Lage Stock

This fixed stock is designed for use with the MPX rifle or registered Short Barreled Rifle. This stock is a combination of our MPX Stock Adapter and our Lage Polymer Stock. Can be converted into a folding stock by adding one of our folding stock mechanisms. Three sets of #10-32 mounting screw holes in the stock adapter provide 11/16" (.69") of vertical adjustment. Slides and locks in place like the factory original stock mount, except with a tighter fit. This buttstock features a sling mount on the top rear of the buttstock. Stock adapter manufactured from 6061 aluminum and finished in flat black anodize. Buttstock is manufactured from glass reinforced nylon, this stock is not only strong, it is more comfortable to shoot in extreme cold or heat than an aluminum stock. Measures 9" from front to rear. Also available in 1" or 2" shorter lengths. Weight: 11 Ounces. 1/2" and 1" stock spacers are available to increase the length. Made in the U.S.A. and engraved "LAGE USA" on the bottom. #340 $104.99
IN STOCK


MPX- Fixed AR15 Stock Adapter | Fixed AR15 Stock | Fixed Shooting Brace

Image Image Image













MPX- AR 15 Stock Adapter

This stock adapter allows you to attach your favorite AR 15 stock to your MPX rifle or registered Short Barreled Rifle. This stock adapter consists of our MPX Stock Adapter with an AR 15 buffer tube adapter. Compatible with Mil-Spec or Commercial buffer tubes. Can also be used to attach a KAK Shockwave Tube and Shockwave Blade Pistol Stabilizer or other pistol stabilizing arm brace to a Scorpion pistol. Can be converted into a folding stock by adding one of our folding stock mechanisms. The stock adapter features three sets of #10-32 mounting screw holes that provide 11/16" (.69") of vertical adjustment. Slides and locks in place like the factory original stock mount, except with a tighter fit. Manufactured from 6061 aluminum and finished in flat black anodize. Adds 1-1/4" to the rear of the receiver. Weighs 3.2 Ounces. Made in the U.S.A. and engraved "LAGE USA" on the bottom. AR 15 Stock, Buffer Tube or Shooting Brace not included. #341 $91.98



MPX- Lage Left Folding Stock

Image Image













MPX- Lage Left Folding Stock

This left folding stock is designed for use with the MPX rifle or registered Short Barreled Rifle. This stock is a combination of our MPX Stock Adapter, our folding stock mechanism and our Lage Polymer Stock. Slides and locks in place like the factory original stock mount, except with a tighter fit. When folded, it will not interfere with operation of the charging handle of the gun. Easily un-folds and solidly locks in place. This buttstock features a sling mount on the top rear of the buttstock. Three sets of #10-32 mounting screw holes provide 3/4" of vertical adjustment. Slides and locks in place like the factory original stock mount, except with a tighter fit. Stock can be configured to fold to the right side by reversing the folding mechanism. Stock adapter and folding stock mechanism manufactured from 6061 aluminum and finished in flat black anodize. Buttstock is manufactured from glass reinforced nylon, this stock is not only strong, it is more comfortable to shoot in extreme cold or heat than an aluminum stock. Measures 9-3/4" from front to rear. Also available in 1" or 2" shorter length. Weight: 6.7 Ounces. 1/2" and 1" stock spacers are available to increase the length. Made in the U.S.A. and engraved "LAGE USA" on the bottom. #342 $164.98



MPX- Left Folding AR15 Stock Adapter | Left Folding AR15 Stock | Left Folding Shooting Brace

Image Image Image













MPX- Left Folding AR15 Stock Adapter

This stock adapter consists of our MPX Stock Adapter with our Folding Stock Mechanism and an AR 15 buffer tube adapter. Compatible with Mil-Spec or Commercial buffer tubes. Allows you to attach your favorite AR 15 stock to your MPX rifle or registered Short Barreled Rifle. Can also be used to attach a KAK Shockwave Tube and Shockwave Blade Pistol Stabilizer or other pistol stabilizing arm brace to a Scorpion pistol. The stock adapter features three sets of #10-32 mounting screw holes that provide 3/4" of vertical adjustment. Slides and locks in place like the factory original stock mount, except with a tighter fit. Manufactured from 6061 aluminum and finished in flat black anodize. Adds 2" to the rear of the receiver. Weighs 6.7 Ounces. Made in the U.S.A. and engraved "LAGE USA" on the bottom. AR 15 Stock, Buffer Tube or Shooting Brace not included. #343 $151.97



MPX- Lage Left Folding Stock, 3 Deg. Cant

Image Image













MPX- Lage Left Folding Stock, 3 Deg. Cant

This left folding stock is designed for use with the MPX rifle or registered Short Barreled Rifle. This stock is a combination of our MPX Stock Adapter, our 3 degree left folding stock mechanism and our Lage Polymer Stock. When folded, the stock swings down 3 degrees to provide more clearance for the cocking piece on the MPX. Easily un-folds and solidly locks in place. This buttstock features a sling mount on the top rear of the buttstock. Three sets of #10-32 mounting screw holes provide 3/4" of vertical adjustment. Slides and locks in place like the factory original stock mount, except with a tighter fit. Stock adapter manufactured from 6061 aluminum and finished in flat black anodize. Buttstock is manufactured from glass reinforced nylon, this stock is not only strong, it is more comfortable to shoot in extreme cold or heat than an aluminum stock. Measures 9-7/8" from front to rear. Also available in 1" or 2" shorter length. Weight: 13.6 Ounces. 1/2" and 1" stock spacers are available to increase the length. Made in the U.S.A. and engraved "LAGE USA" on the bottom. #344 $164.98



MPX- AR15 Left Folding Stock Adapter, 3 Deg. Cant | AR15 Left Folding Stock, 3 Deg. Cant | Shooting Brace, Left Folding, 3 Deg. Cant

Image Image Image













MPX- AR15 Left Folding Stock Adapter, 3 Deg. Cant

This left folding stock adapter is designed for use with the MPX rifle or registered Short Barreled Rifle When folded, the stock swings down 3 degrees. Extra wide stocks or stocks with storage compartments on them may not not completely fold flat along the side of the gun. Easily un-folds and solidly locks in place. This buttstock features a sling mount on the top rear of the buttstock. Three sets of #10-32 mounting screw holes provide 3/4" of vertical adjustment. Slides and locks in place like the factory original stock mount, except with a tighter fit. Stock adapter manufactured from 6061 aluminum and finished in flat black anodize. Buttstock is manufactured from glass reinforced nylon, this stock is not only strong, it is more comfortable to shoot in extreme cold or heat than an aluminum stock. Measures 2-1/8" from front to rear. Also available in 1" or 2" shorter length. Weight: 6.6 Ounces. 1/2" and 1" stock spacers are available to increase the length. Made in the U.S.A. and engraved "LAGE USA" on the bottom. AR 15 Stock, Buffer Tube or Shooting Brace not included. #345 $151.97



MPX- Lage Right Folding Stock, 5 Deg. Cant

Image Image













MPX- Lage Right Folding Stock, 5 Deg. Cant

This right folding stock adapter is designed for use with the MPX rifle or registered Short Barreled Rifle When folded, the stock swings down 5 degrees to provide ample clearance for the ejection port. The gun can be reliably fired with the stock folded. Easily un-folds and solidly locks in place. This buttstock features a sling mount on the top rear of the buttstock. Three sets of #10-32 mounting screw holes provide 3/4" of vertical adjustment. Slides and locks in place like the factory original stock mount, except with a tighter fit. Stock adapter manufactured from 6061 aluminum and finished in flat black anodize. Buttstock is manufactured from glass reinforced nylon, this stock is not only strong, it is more comfortable to shoot in extreme cold or heat than an aluminum stock. Measures 9-7/8" from front to rear. Also available in 1" or 2" shorter length. Weight: 13.5 Ounces. 1/2" and 1" stock spacers are available to increase the length. Made in the U.S.A. and engraved "LAGE USA" on the bottom. #346 $164.98




MPX- AR15 Right Folding Stock Adapter, 5 Deg. Cant | AR15 Right Folding Stock, 5 Deg. Cant | Shooting Brace, Right Folding, 5 Deg. Cant

Image Image Image













MPX- AR15 Right Folding Stock Adapter, 5 Deg. Cant

This right folding stock adapter is designed for use with the MPX rifle or registered Short Barreled Rifle When folded, the stock swings down 5 degrees to provide ample clearance for the ejection port. The gun can be reliably fired with the stock folded. Extra wide stocks or stocks with storage compartments on them may not not completely fold flat along the side of the gun. Easily un-folds and solidly locks in place. This buttstock features a sling mount on the top rear of the buttstock. Three sets of #10-32 mounting screw holes provide 3/4" of vertical adjustment. Slides and locks in place like the factory original stock mount, except with a tighter fit. Stock adapter manufactured from 6061 aluminum and finished in flat black anodize. Buttstock is manufactured from glass reinforced nylon, this stock is not only strong, it is more comfortable to shoot in extreme cold or heat than an aluminum stock. Measures 2-1/8" from front to rear. Also available in 1" or 2" shorter length. Weight: 6.5 Ounces. 1/2" and 1" stock spacers are available to increase the length. Made in the U.S.A. and engraved "LAGE USA" on the bottom. AR 15 Stock, Buffer Tube or Shooting Brace not included. #347 $151.97



MPX- K-Stock, Left Folding, 3 Deg. Cant

Image Image













MPX- K-Stock, Left Folding, 3 Deg. Cant

This right folding stock is designed for use with the MPX rifle or registered Short Barreled Rifle When folded, the stock swings down 3 degrees. The thin profile of the stock allows it to lay very flat on the gun. Stock is made from 6061 aluminum and Delrin. Very light, but extremely strong. Slides and locks in place like the factory original stock mount, except with a tighter fit. Stock adapter, folding mechanism and stock cheek bar manufactured from 6061 aluminum and finished in flat black anodize. Buttstock is manufactured from black Delrin. Measures 10-3/4" from front to rear. Also available shorter lengths. Weight: 12 Ounces. Made in the U.S.A. and engraved "LAGE USA" on the bottom. #348 $215.99



MPX- K-Stock, Right Folding, 5 Deg. Cant

Image Image













MPX- K-Stock, Right Folding, 5 Deg. Cant

This right folding stock is designed for use with the MPX rifle or registered Short Barreled Rifle When folded, the stock swings down 5 degrees to provide ample clearance for the ejection port. The gun can be reliably fired with the stock folded. The thin profile of the stock allows it to lay very flat on the gun. Stock is made from 6061 aluminum and Delrin. Very light, but extremely strong. Slides and locks in place like the factory original stock mount, except with a tighter fit. Stock adapter, folding mechanism and stock cheek bar manufactured from 6061 aluminum and finished in flat black anodize. Buttstock is manufactured from black Delrin reinforced nylon. Measures 10-3/4" from front to rear. Also available shorter lengths. Weight: 11.7 Ounces. Made in the U.S.A. and engraved "LAGE USA" on the bottom. #349 $215.99



Individual Stock Parts


K-Grip

Image

Forward Canted K-Grip, Clamp On

Description PRICE
This clamp on K-Grip attaches to any M1913 Picatinny rail. The canted angle allows a natural shooting stance which is more comfortable than a straight vertical grip. The clamp is made from 6061 aluminum and finished in black anodize. The grip portion is made from black polymer and will stay cool during extended shooting sessions. #419A $49.99




MPX Stock Adapter MPX Stock










SIG MPX Stock Adapter

This stock adapter is designed for use with the SIG MPX pistol or rifle. Compatible with all of our stock adapters and folding mechanisms. Additionally, it is compatible with any ACE Rifle Stock patterned stock or folding stock mechanism with two #10-32 mounting screw holes spaced 5/8" (.625") apart. This is also a standard mounting pattern for stocks made by Manticore Arms, DPH, Stormwerkz, HDPS and more With the addition of our AR-15 Stock Adapter, a commercial or Mil-Spec' buffer tube can be added to attach an AR stock, SIG Brace or Shockwave Blade. Secures with one screw. Manufactured from 6061 aluminum and finished in flat black anodize. Adds .40" to the rear of the receiver. Weighs 2.4 Ounces. Made in the U.S.A. and engraved "LAGE USA" on the bottom. #329 $59.99



Lage Rifle Stock

Rifle Stocks

Description PRICE
This light weight durable stock is designed for use with all of our stock adapters and folding mechanisms. Additionally, it is compatible with any ACE Rifle Stock patterned folding stock mechanism and stock adapters with two #10-32 mounting screw holes spaced 5/8" (.625") apart. This buttstock features a sling mount on the top rear of the buttstock. Manufactured from glass reinforced nylon, this stock is not only strong, it is more comfortable to shoot in extreme cold or heat than an aluminum stock. Measures 8-1/2" from front to rear. Also available in 1" or 2" shorter length. Weight: 8-1/2" is 7.6 Ounces, 7-1/2" is 7.0 Ounces, 6-1/2" is 6.4 Ounces. 1/2" and 1" stock spacers are available to increase the length. Mounting Screws included. Made in the U.S.A.
8-1/2" Stock. #302
(Recommended Length for MPX or Scorpion)
$45.00

7-1/2" Stock. #301 $45.00
6-1/2" Stock. #300 $45.00


Lage Stock Spacer











Stock Spacers

Description PRICE
Stock spacers for our stocks above. Can be used with any length stock. These stock spacers allow you to configure a custom length of pull. length. Weight: 1/2" is .2 Ounces, 1" is .4 Ounces. Extra long Mounting Screws included.
1/2" Stock Spacer. #330 $7.00
1" Stock Spacer. #331 $7.00


Image Image














Lage K-Folding Stock, Right Folding, 5 Deg. Cant

Description PRICE
This stock features a folding mechanism that folds the stock down at a five degree angle to provide clearance for the ejection port and controls on the right side of the receiver. It is designed with a thinner profile to fold very flat and provide a slim package. It is designed for use with all of our stock adapters. Additionally, it is compatible with any stock adapter with two #10-32 mounting screw holes spaced 5/8" (.625") apart. The folding stock mechanism and stock cheek bar are made from black anodized 6061 aluminum and the buttpad is made from black Delrin. Length from the butt to the rear of the stock adapter plate is 10-3/8". Available in lengths as short as 8". Weight: 9.4 Ounces. Recommended FSM for: Sig MPX, EVO Scorpion, MAX-31A, MAX-31k, MAX-11A1 Made in the U.S.A. Lage P/N: FSMK5R #350 $164.98




Lage Folding Stock Mechanisms (FSM)

The Lage Folding Stock Mechanism (FSM)fits between the Stock Adapter and Stock. Lage FSMs are designed to be easier to open than competitors' designs. Wrap your fingers around the stock and put your thumb on top of the hinge pin and squeeze. Easily pops open. Locks in open or closed position, pull from the side to deploy.

Our FSMs are manufactured with the Boss. Must be used with a stock adapter with a pocket machined for the Boss.


Image












Lage Folding Stock Mechanism, Left or Right Folding

Description PRICE
The FSM can be mounted to fold either left or right. Will add .83 to your LOP. Weighs 3.5 oz. Manufactured from 6061 aluminum and finished in black anodize. Made in the U.S.A. Lage P/N: FSM1 $59.99


Image












Lage Folding Stock Mechanism, Left Folding, 3 Deg. Cant

Description PRICE
The Left folding FSM with three degree cant. When folded on the side of the gun, the stock swings down at a three degree angle providing clearance for cocking knobs or other controls on the left side of the gun. Will add .9 to your LOP and has 1/2" of vertical adjustment. Weighs 3.1 oz. Manufactured from 6061 aluminum and finished in black anodize. Made in the U.S.A. Lage P/N: FSM3L $59.99




Image












Lage Folding Stock Mechanism, Right Folding, 5 Deg. Cant

Description PRICE
The Right folding FSM with five degree cant. When folded on the side of the gun, the stock swings down at a five degree angle providing clearance for the ejection port, cocking knobs or other controls on the right side of the gun. Will add .9 to your LOP and has 1/2" of vertical adjustment. Weighs 3.2 Ounces. Manufactured from 6061 aluminum and finished in black anodize. Recommended FSM for: Sig MPX and EVO Scorpion Made in the U.S.A. Lage P/N: FSM5R $59.99




Image












ACE Folding Stock Mechanism

Description PRICE
Folding Stock Mechanism (FSM)fits between the Stock Adapter and Stock. The FSM can be mounted to fold either left or right. Locks in open or closed position, pull from the side to deploy. #10-32 threaded hole on side to add a sling mount.Will add .75 to your LOP and has 1/2" of vertical adjustment. Weighs 3.5 oz. The FSM is manufactured with the Boss. The Boss is the raised (oblong shaped) portion on the Arm (small side). Manufactured from 6061 aluminum and finished in black anodize. ACE P/N: A500. Made in the U.S.A. #ACEFSM $59.99




AR15 Stock Adapter AR-15 Stock Adapter












AR15 Stock Adapter with Boss

Description PRICE
With the addition of our AR-15 Stock Adapter, a commercial or Mil-Spec' buffer tube can be added to attach an AR stock, SIG Brace or Shockwave Blade to one of our stock adapters. Mounting side has a raised Boss. Not compatible with our Folding Stock Mechanism. Attaches to the stock adapter with two #10-32 screws. Buffer tube is secured with one screw. A buffer tube castle nut is also recommended. 1/2" of vertical adjustment. Manufactured from 6061 aluminum and finished in flat black anodize. Weighs .7 Ounces. #352 $31.99


AR15 Stock Adapter AR-15 Stock Adapter












AR15 Stock Adapter without Boss

Description PRICE
With the addition of our AR-15 Stock Adapter, a commercial or Mil-Spec' buffer tube can be added to attach an AR stock, SIG Brace or Shockwave Blade to one of our folding stock mechanisms. Mounting side is flat faced without a boss. Attaches to the stock adapter with two #10-32 screws. Buffer tube is secured with one screw. A buffer tube castle nut is also recommended. 1/2" of vertical adjustment. Manufactured from 6061 aluminum and finished in flat black anodize. Weighs .7 Ounces. #351 $31.99



Note: All prices are subject to change without notice.