LAGE Mfg. Products: MAX-10

M-10/9 and M-10/45 CURRENT PRODUCTS

Note: All prices are subject to change without notice.

MAX-10/9 Slow Fire Upper Receiver $895.00

MAX-10/45 Slow Fire Upper Receiver $895.00

Features include adjustable front and rear sights, full length M1913 scope rail and hard mount points for additional M1913 rails on right, left and bottom of front handgrip. Bottom rail included. Contained within the upper receiver is a heavy weight bolt assembly that telescopes over the barrel. The bolt weight is securely attached to the bolt assembly with two hardened cap screws- no welds to crack or break. This reduces the rate of fire (ROF) from 1,100 RPM down to around 600 RPM. Easily shoot single, double or triple round bursts- just count them off while its firing, it's that slow and easy. Due to the reduced ROF, muzzle rise is reduced and multiple rounds stay on target. The MAX-10/45 attaches to the stock M-10/45 lower receiver without any modification to the lower receiver.

The picture above shows a MAX-10/45 with additional Lage Mfg. accessories that are not included with the MAX-10/45 upper receiver. Accessories are available below. Registered lower receiver and magazine is not included.

Features:

1) Rear Sight , Adjustable 2) Front Sight , Adjustable 3) Scope/Optics rail (Mil-Std-1913) 4) Front Hand Grip 5) Front Grip Retaining Pin 6) Lower Accessory Rail (Mil-Std-1913) 7) 9" inch barrel length, removeable (threaded 7/8-9) 8) Side Accessory Rail Mounting Points 9) Cocking Handle (reciprocating)

Price is $895.00 each plus $27.00 for shipping within the CONUS (USPS Priority 2nd Day Delivery, with signature confirmation).

Click here to see more pictures!

Click here for MAX-10/45 Slowfire Upper Receiver- Owners Manual

Click here for ordering instructions.

MAX-10/9, 8-1/2" Replacement Barrel, 1/2-28 Thread $120.00

Made from 4140 Chrome Moly steel, these 8-1/2 inch MAX-10/9 9mm replacement barrels are finished in black oxide. Muzzle is threaded 1/2-28.

Priced at $120.00 each plus $9.10 for shipping within the CONUS (USPS 1st class mail, with delivery confirmation).

MAX-10/9, 8-1/2" Replacement Barrel, 3/4-10 Thread $140.00

Made from 4140 Chrome Moly steel, these 8-1/2 inch MAX-10/9 9mm barrels are finished in black oxide. Muzzle is threaded 3/4-10.

Priced at $140.00 each plus $9.10 for shipping within the CONUS (USPS 1st class mail, with delivery confirmation).

MAX-10/45, 9" Replacement Barrel, 7/8-9 Thread $120.00

Made from 4140 Chrome Moly steel, these 9 inch MAX-10/45 45 ACP replacement barrels are finished in black oxide. Muzzle is threaded 7/8-9.

Priced at $120.00 each plus $9.10 for shipping within the CONUS (USPS 1st class mail, with delivery confirmation).

MAX-10/45, 8-1/2" Barrel, 5/8-24 Thread $140.00

Made from 4140 Chrome Moly steel, these 8-1/2 inch MAX-10/45 45 ACP replacement barrels are finished in black oxide. Muzzle is threaded 5/8-24.

Priced at $140.00 each plus $9.10 for shipping within the CONUS (USPS 1st class mail, with delivery confirmation).

MAX-10/45 Speed Bolt $245.00

Designed for use with the MAX-10/45 Slowfire Upper Receiver, this "Speed Bolt" bolt assembly was designed for those who like the look of the MAX-10/45 but wanted a faster rate of fire. This bolt assembly utilizes an aluminum bolt weight to speed up the rate of fire to around 800 rounds per minute. This is a complete bolt assembly requiring you to only swap out the bolt assembly of your MAX-10/45 to increase your rate of fire from the standard 600 RPM to 800 RPM.

Priced at $245.00 each plus $9.10 for shipping within the CONUS (USPS 1st class mail, with delivery confirmation).

K-Grip $85.00

Designed for use with the MAX-10/9 or MAX-10/45 Slowfire Upper Receiver, this K-Grip replaces the standard grip. The grip is forward canted allowing a natural shooting stance. Easy to install, just remove the retaining pin from the MAX-10, remove grip, slide on K-Grip and re-install retaining pin.

Priced at $85.00 each plus $5.45 for shipping within the CONUS (USPS 1st class mail, with delivery confirmation).

Metal Foregrip $125.00

Designed for use with the MAX-10 Slowfire Upper Receiver, this all metal foregrip replaces the standard MAX-10 grip. The front is aluminum and the rest is all steel. Finished in tough KG Gunkote to match the manganese phosphate finish of the MAX-10. Features an integral lower picatinny rail. The bottom picatinny rail fits flush with the bottom of the lower receiver.

Metal Foregrip, K-Grip $115.00

Designed for use with the MAX-10 Slowfire Upper Receiver, this all metal foregrip with polymer forward canted K-Grip replaces the standard MAX-10 grip. The front is aluminum and the rest is all steel except the K-Grip handle. Finished in tough KG Gunkote to match the maganese phosphate finish of the MAX-10. Features a forward canted K-Grip without a picatinny rail on the bottom.

Side Accessory Rails $49.99

Left and right side accessory rails for attaching additional accessories to the sides of the MAX-10 Slow Fire Upper Receiver such as flashlights or lasers. Matches the bottom accessory rail provided with the stock front grip on the MAX-10 Slow Fire Upper Receiver. Provided with spacers to allow use of accessories that require a higher mount. All mounting hardware provided.

Priced at $49.99 each plus $5.45 for shipping within the CONUS (USPS 1st class mail, with delivery confirmation).

Fixed Buttstock- High Mount $200.00

Designed for use with the MAX-10 upper receiver, this stock features a higher cheek comb.

Click here for more information and pictures.
Priced at $200.00 each plus $12.00 for shipping within the CONUS (USPS 1st class mail, with delivery confirmation).

Left Folding Buttstock $249.00

This high stock is designed for use with the MAX-10 Slowfire Upper Receiver. When folded, it will not interfere with operation of the subgun. Easily un-folds and solidly locks in place. Sling mount at rear of the stock.

Click here for more information and pictures.

Priced at $249.00 each plus $12.00 for shipping within the CONUS (USPS 1st class mail, with delivery confirmation).

M-10 Collapsible Buttstock$120.00

This collapsible stock is a drop-in replacement for the wire form stock that comes with the M-10. Sturdy construction will not fold up in use. Click here for more information and pictures

ACE Rifle Stock Adapter $89.00

This stock adapter is designed for use with the MAX-10/45 Slowfire Upper Receiver. Allows use of buttstocks manufactured by ACE LTD. USA.

Priced at $89.00 each plus $5.45 for shipping within the CONUS (USPS 1st class mail, with delivery confirmation).

2-Piece Molded Grip, M-10/45$59.99

This molded polymer grip features one finger groove, ribs on the front, stippling on the sides, is more rounded on the backstrap than the stock grip and extends lower. It also features a "mag funnel" on the bottom. Additionally, the rounded backstrap also makes for a more comfortable grip. Material is a hard plastic polymer, not rubber. Grip is two pieces and attaches with your existing grip screw.
This quality item is priced at only $59.99 each plus $5.45 for shipping within the CONUS (USPS 1st class mail, with delivery confirmation).

2-Piece Molded Grip with Thumb Activated Magazine Release, M-10/45 $89.99

This molded polymer grip has the same features as the 2-piece molded grip above, with the addition of a lever above the grip to activate the heel mounted magazine release. Designed for use with original MAC magazines or unmodified Grease Gun Magazines. This molded grip is the same as the standard 2-piece molded grip except it has an internal mechanism to activate the heel mounted magazine release with a thumb actuated lever at the top of the grip. When used with "drop-free" magazines, you will be able to drop the empty magazine while reaching for a replacement magazine. This facilitates the fastest possible reload you will be able to perform with your M-10/45.

Requires no modification to your lower receiver. Includes 2-piece molded grip, magazine release lever, spring, connecting link with thumb release and detailed installation instructions. To install, simply remove your old grip, magazine release lever and spring and install the new lever, link, spring and front half of the grip. Install the grip backstrap and secure with the original screw.

Right and left hand version available. Please specify when ordering.

Priced at $89.99 each plus $5.45 for shipping within the CONUS (USPS 1st class mail, with delivery confirmation).

Extended Safety $49.99

This extended safety makes it quick and easy to positively engage and disengage your safety. Great for use in subgun competitions. Get on target quickly without fumbling with the safety. Will fit the M-11/9 or the Powder Springs M-10/45 or M-10/9. Click here for more information and pictures

Internal Safety Slide$34.99

This internal safety slide is designed to have more bearing surface and is made from steel with a black oxide finish.
Priced at $34.99 each plus $5.45 for shipping within the CONUS (USPS 1st class mail, with delivery confirmation).

M-10 Buffer $8.00

This replacement buffer fits bothe the M-10/45 and M-10/9. It is manufactured from 1/4" thick neoprene. It is precision cut to insure a perfect fit and reliable performance.

Priced at $8.00 each plus $2.45 for shipping within the CONUS (USPS 1st class mail, with delivery confirmation).

Note: All prices are subject to change without notice.