M-11/9 SMG

Bolt Assembly and Parts


NFA Warning

These parts are designed to be used with the SWD M-11/9 submachine gun. NFA (National Firearms Act, Title 26, United States Code) rules apply to their use and possession. It is the owners/users responsibility to comply with all local, State and Federal laws and regulations in the use of this product. Possession of a full auto bolt or full auto firing pin with a semi-auto M-11/9 lower receiver is illegal and potentially dangerous.

Image
Stripped Bolt, M-11/9 SMG
Description PRICE
Replacement bolt for the M-11/9 SMG. Features a machined firing pin in the bolt face. DOES NOT INCLUDE the Extractor, Extractor Spring, Extractor Roll Pin, Cocking Handle Pin, Cocking Handle, Recoil Rod, Recoil Rod Roll Pin, Ejector Rod, Recoil Spring, Recoil Plate or Buffer. Just a stripped bolt. #237 $90.00

Image
Bolt Assembly, M-11/9 SMG
Description PRICE
Replacement bolt assembly for the M-11/9 SMG. Features a machined firing pin in the bolt face. INCLUDES the Bolt, Extractor, Extractor Spring, Extractor Roll Pin, Recoil Rod, Recoil Rod Roll Pin, Ejector Rod, Recoil Spring, Recoil Plate and Buffer. DOES NOT INCLUDE Charging Handle Anti-Rotation Pin. This bolt assembly is for use with the original Low Profile "Hockey Puck" charging handle. Complete assembled Bolt Assembly. Does not include Charging Handle. #428 $150.00

Image
Bolt Assembly, M-11/9 SMG with Anti-Rotation Pin
Description PRICE
Replacement bolt assembly for the M-11/9 SMG. Features a machined firing pin in the bolt face. INCLUDES the Bolt, Extractor, Extractor Spring, Extractor Roll Pin, Charging Handle Anti-Rotation Pin, Recoil Rod, Recoil Rod Roll Pin, Recoil Spring, Recoil Plate and Buffer. This bolt assembly is for use with the newer Extended Charging Handle that has an anti-rotaion feature. The bolt has a pin installed in it that the charging handle engages. This pin will prevent the original low profile charging handle from installing. Complete Assembled Bolt Assembly. Does not include Charging Handle. #13 $150.00

Image
Tungsten CF-W Slow Fire Bolt Assembly, M-11/9 SMG
Description PRICE
CF-W Tungsten bolt assembly for the M-11/9 SMG. This bolt is for use with original steel M-11/9 submachinegun upper receiver or aftermarket side cocking upper receivers that are designed to use the original bolt assembly. The CF-W bolt can also be used with our MAX-11S or MAX-11Sk upper receiver. This tungsten alloy bolt is precision CNC machined from a solid billet of Tungsten. Tungsten is an extremely dense material and a W bolt weights over twice as much as an original SWD M-11/9 bolt. This increased weight results in a ROF reduction of well over half while retaining the gun's original overall dimensions. The end result is a transferable subgun with the lowest ROF in the smallest package available today. With a very controllable ROF of between 600-650 RPM, the M-11/9 is now very smooth and controllable. Singles are super easy! Complete assembled Bolt Assembly. Does not include Charging Handle. Does not have anti-rotation pin for charging handle. Vegas SMG is the manufacturer and provides warranty and technical support for this item.
E-Mail: VegasWbolts@gmail.com, Phone: 702-706-4486 #428-CFW
$750.00

Image
Bolt Assembly Rebuild Kit, M-11/9 SMG
Description PRICE
Everything you need to rebuild your bolt for your M-11/9 SMG. INCLUDES the Lage Improved Extractor, Extractor Spring, Extractor Roll Pin, Recoil Rod, Recoil Rod Roll Pin, Ejector Rod, Recoil Spring, Recoil Plate and Buffer. If you have an older OEM bolt with a removeable firing pin, you will also need to order the Firing Pin (Flat) and Firing Pin Retainer. If you have an aftermarket bolt with the Charging Handle Anti-Rotation Pin, you will need to order it as well. #235 $60.00

Image
Extended Charging Handle, M-11/9 SMG
Description PRICE
Tall profile Charging Handle for the M-11/9 SMG. Must be used with a Bolt that has an Anti-Rotation Pin in the Charging Handle hole. #199 $20.00

Image
Charging Handle Anti-Rotation Pin, M-11/9 SMG
Description PRICE
Some Charging Handles require an Anti-rotation Pin installed in the Bolt to prevent them from rotating. This pin installs next to the Charging Handle hole in the top of the Bolt. Your Bolt must already have the hole for this pin. #196 $2.00

Image
Charging Handle (Hockey Puck)
Description PRICE
Original style low profile Charging Handle (Hockey Puck) for the M-11/9 SMG. #232 $20.00

Image
Firing Pin (Flat), M-11/9 SMG
Description PRICE
Firing Pin for the original SWD M-11/9 SMG. This is for bolts that have a removeable flat Firing Pin. #236 $25.00

Image
Firing Pin Retainer, M-11/9 SMG
Description PRICE
Firing Pin Retainer for the original SWD M-11/9 SMG. This is for bolts that have a removeable flat Firing Pin. The Firing Pin Retainer inserts through the side of the bolt and the flat Firing Pin, securely holding it in place. #234 $10.00

Image
Improved Extractor
Description PRICE
If you are experiencing extraction problems with your M-11/9, odds are you need to replace your Extractor with this improved design. This new design, which is standard equipment on all MAX-11 Mk1 and Mk2 Upper Receivers, features a wider extraction groove and improved angle on the face of the Extractor. Manufactured from 4140 hardened steel and finished in black oxide, this Extractor is built to last. #50 $12.00

Image
Extractor Spring, M-11/9 SMG
Description PRICE
Extractor Spring, M-11/9 SMG. Extra power spring for reliable extraction. #129 $5.00

Image
Extractor Roll Pin, M-11/9 SMG
Description PRICE
The Extractor Roll Pin holds the Extractor in the Bolt. #164 $2.00

Image
Recoil Spring, M-11/9 SMG
Description PRICE
Recoil Spring for orginal M-11/9 SMG. 11-1/2" Long. The Recoil Spring attaches to the Recoil Rod, Recoil Plate and Buffer and is secured to the Bolt Assembly with a Roll Pin. #23 $8.00

Image
Recoil Rod, M-11/9 SMG
Description PRICE
Recoil Rod for orginal M-11/9 SMG. The Recoil Rod is the larger of the two rods on the Bolt Assembly. The Recoil Spring slides on the Recoil Rod. #80 $10.00

Image
Recoil Rod Roll Pin, M-11/9 SMG
Description PRICE
Recoil Rod Roll Pin for securing the Recoil Rod to the Bolt. The Recoil Rod Roll Pin installs in a cross hole located at the end of the Recoil Rod. #24 $2.00

Image
Ejector Rod, M-11/9 SMG
Description PRICE
Ejector Rod for the M-11/9 SMG. Hardened for extra strength. The Ejector Rod is the smaller of the two rods in the Bolt Assembly. If your Bolt Assembly does not freely move back and forth, check to see if your Ejector Rod is bent. If so, replace it. Over insertion of some aftermarket steel magazines can bend the Ejector Rod. #58H $12.50

Image
Buffer
Description PRICE
This replacement Buffer for the M-11/9 SMG is manufactured from 1/4" thick neoprene. It is precision cut to insure a perfect fit and reliable performance. The Buffer prevents the Bolt, under full recoil, from making contact with the rear of the Lower Receiver. #63 $5.00

Image
Recoil Plate, M-11/9 SMG
Description PRICE
Recoil Plate, M-11/9 SMG. #79 $8.00



Fire Control Parts

Image
Hardened Sear
Description PRICE
This M-11/9 Sear is hardened to provide extra strength and durability. Original Sears may have been improperly hardened during the rush to get as many M-11/9 machineguns manufactured and registered prior to May of 1986. If your M-11/9 ocasionally continues to fire after letting go of the Trigger or "runs away", your Sear may be worn. Check the tip of the Sear that engages the Sear Notch in the Bolt to make sure it is not rounded off. If it is, replace the Sear. These Sears are made from 4140 steel and hardened to 42-46 on the Rockwell C Scale. #106 $49.99

Image
Sear Spring, M-11/9 SMG
Description PRICE
The Sear Spring provides spring pressure to return the Sear to its upward engagement position. It installs in a hole in the bottom of the Sear and seats against the bottom of the Lower Receiver. #119 $8.00

Image
Selector, CNC Machined, M-11/9 SMG
Description PRICE
The Selector switches the fire mode to either semi-auto or full auto. It also retains the Trip and Sear. This Selector is CNC machined for a precise fit and function. The original Selectors were made from castings. #117 $29.99

Image
Trip, M-11/9 SMG
Description PRICE
The Trip is installed on the Selector Pin and cams against the Disconnector when the Selector is set to Semi-Auto Mode and the Bolt is seated forward when firing. The Trip slides the Disconnector off of the Sear, releasing it to rise up and catch the Bolt. #118 $23.95

Image
Trigger, CNC Machined, M-11/9 SMG
Description PRICE
Stripped Trigger WITHOUT Disconnector or Roll Pin. The Trigger installs in the Lower Receiver and rotates on the Trigger Pin. The Disconnector is attached to the Trigger and pulls down on the Sear to release the Bolt. This Trigger is CNC machined for a precise fit and function. The original Triggers were made from castings. #112 $34.00

Image
Trigger Pin, M-11/9 SMG
Description PRICE
The Trigger Pin installs in the Lower Receiver and through the Trigger. The Trigger pivots on this Pin. It is secured in the Lower Receiver by the Retainer Spring. #116 $9.95

Image
Trigger Spring, M-11/9 SMG
Description PRICE
The Trigger Spring returns the Trigger to the forward position after being pulled. It is installed on the Trigger Pin, along with the Trigger. The Trigger Spring also has a leg that provides spring pressure for the Disconnector. #115 $15.00

Image
Disconnector, CNC Machined, M-11/9 SMG
Description PRICE
The Disconnector installs on the Trigger with a Roll Pin. The Disconnector is attached to the Trigger and pulls down on the Sear to release the Bolt. This Disconnector is CNC machined for a precise fit and function. The original Disconnectors were made from castings. #113 $23.95

Image
Disconnector Roll Pin, M-11/9 SMG
Description PRICE
The Disconnector Roll Pin secures the Disconnector to the Trigger. #114 $2.00

Image
Retainer Spring, M-11/9 SMG
Description PRICE
The Retainer Spring secures the Trigger Pin and Selector Pin in the Lower Receiver. #192 $12.00



Safety Parts

Image
Safety Roll Pin, M-11/9 SMG
Description PRICE
This Roll Pin secures the Safety Button to the Safety Slide. #26 $2.00

Image
Internal Safety Slide
Description PRICE
This Internal Safety Slide replaces the cheap cast aluminum one that came with your M-11/9. It is designed to have more bearing surface and is made from steel with a black oxide finish. #51 $29.99

Image
Safety Spring, M-11/9 SMG
Description PRICE
The Safety Spring installs inside the Safety Slide along with the Safety Detent Ball. #107 $2.00

Image
Safety Detent Ball, M-11/9 SMG
Description PRICE
The Safety Detent Ball installs inside the Safety Slide along with the Safety Spring. Some M-11/9 SMG's have a Stepped Plunger instead of a Detent Ball. The Detent Ball replaces the Plunger. #108 $2.00



Magazine Catch Parts

Image
Mag' Catch, M-11/9 SMG
Description PRICE
The Magazine Catch holds the Magazine in place in the Magazine Housing. #49 $12.50

Image
Mag' Catch Pin, M-11/9 SMG
Description PRICE
This pin is used to install the Magazine Catch to the Magazine Housing. The Magazine Catch pivots on this pin. #195 $2.00

Image
Mag' Catch Spring, M-11/9 SMG
Description PRICE
This spring is for the Magazine Catch. It provides spring tension to the Magazine Catch to keep the Magazine in the Magazine Housing. #163 $5.00



Stock Latch Parts

Image
Stock Latch, M-11/9 SMG
Description PRICE
The Stock Latch installs in the Lower Receiver and secures the Stock in the open position. Lugs on the Stock Latch engage notches in the Wire Form Stock. #121 $31.50

Image
Stock Pin, M-11/9 SMG
Description PRICE
The Stock Pin installs in the Lower Receiver and retains the Stock Latch Spring and Stock Latch Plunger. #123 $4.95

Image
Stock Spring, M-11/9 SMG
Description PRICE
The Stock Spring installs in the Stock Latch and provides spring pressure to lock the Latch into the notches in the Wire Form Stock. #124 $2.95

Image
Stock Plunger, M-11/9 SMG
Description PRICE
The Stock Plunger installs between the Stock Latch Spring and the Stock Pin. #122 $4.95



Other Parts

Image
Grip Screw, M-11/9 SMG
Description PRICE
The Grip Screw secures the Grip Backstrap to the Magazine Housing. Slotted head screw. #194 $2.00



Retaining Pins

Image
2-Piece Receiver Pin, M-11/9 SMG
Description PRICE
2-Piece Receiver Pin. Original design for the M-11/9 SMG. The Receiver Pin inserts through the Lower Receiver retaining pin hole and through the Upper Receiver retaining pin hole, securing the two together. #233 $25.00

Image
1-Piece Low Profile Receiver Pin, M-11/9 SMG
Description PRICE
1-Piece Receiver Pin uses a spring loaded ball detent to securely attach the Lower Receiver to Upper Receiver. Just push through receiver to remove. #409 $24.99

Note: All prices are subject to change without notice.